Sensors already equip a range of tools to enhance monitoring capacity for conservation. Some of the higher bandwidth technologies, like camera traps and acoustic monitoring systems, have been essential elements of the conservation toolkit for decades, and thus have enough users that we've created dedicated WILDLABS groups to address them. But a whole range of lower bandwidth sensors beyond these core technologies are being increasingly integrated into conservation monitoring systems, and offer rich new insights into the wildlife and ecosystems we're all working to protect. As with many technologies, cost and access have historically been challenges to the adoption of new sensors, but with low-cost and open-source solutions on the rise, we're excited to see what the future of this space holds.
Getting Started with Sensors:
- Watch Shah Selbe's Tech Tutors episode on scaling FieldKit, an open-source conservation sensor toolbox, from a project to a successful conservation tech product.
- Check out our Virtual Meetup about Low-Cost, Open-Source Solutions in conservation tech, including a talk by Alasdair Davies on the Arribada Initiative's work with thermal sensors in early warning systems.
- For a more in-depth introduction, watch the first video in our datalogger mini-series: Freaklabs: How do I get started with Arduino?
In this group, you'll meet others who are using and innovating diverse sensors in their work, discuss ways to make sensors more effective & accessible for conservationists, learn about what sensors are already helping us accomplish in the field, and have the opportunity to ask and answer questions. Join this group to get started!
Header image: Emma Vogel, University of Tromsø
- @Mauricio_Akmentins
- | he/him
National Scientific and Technical Research Council of Argentina (CONICET)
Herpetologist and conservationist, focused on the conservation of the endemic and threatened amphibian species of NW Argentina.
- 1 Resources
- 3 Discussions
- 6 Groups
- 0 Resources
- 0 Discussions
- 3 Groups
Wildlife Conservation Society (WCS)
- 1 Resources
- 0 Discussions
- 6 Groups
- @YvanSG
- | he/him
Clemson University
Seabird ecologist at Clemson University, South Carolina Cooperative Fish and Wildlife Research Unit. Co-chair of Caribbean Seabird Working Group.
- 0 Resources
- 53 Discussions
- 6 Groups
Prof at NC State University and Scientist at NC Museum of Natural Sciences
- 1 Resources
- 19 Discussions
- 4 Groups
I'm a Mechanical Engineer and I have been involved in test and measurement, IT maintenance consulting, database development, field installation, field maintenance, systems analysis, theater composition and an active synthesist. Currently engaged in conservation volunteer work
- 0 Resources
- 0 Discussions
- 7 Groups
- 1 Resources
- 2 Discussions
- 1 Groups
- @tutgut5
- | she/her
- 0 Resources
- 6 Discussions
- 8 Groups
- @NevilleCLS
- | He/Him
CLS (Collecte Localisation Satellites)
- 0 Resources
- 1 Discussions
- 14 Groups
Cornell University
- 0 Resources
- 0 Discussions
- 6 Groups
Smart Parks
Founder of Smart Parks - www.smartparks.org / Founder of OpenCollar - https://opencollar.io
- 0 Resources
- 13 Discussions
- 5 Groups
- @tmcgrath
- | He / Him
Geographer, Program Manager, Engineering Manager
- 0 Resources
- 0 Discussions
- 8 Groups
Article
Read our interview with Clementine Uwamahoro, African Parks’ Country Manager in Conservation Technology overlooking technology operations for both Akagera National Park and Nyungwe National Park.
29 November 2023
The Department of Applied Ocean Physics and Engineering (AOPE) at the Woods Hole Oceanographic Institution (WHOI) seek to hire 1-2 scientists at any of the Assistant/Associate/Senior Scientist levels to develop research...
27 November 2023
TagRanger® is a state-of-the-art wildlife finding, monitoring and tracking solution for research, conservation and environmental professionals. With superior configurability for logging data, reporting location and...
23 November 2023
Yale University & Map of Life Rapid Assessments - XPRIZE
8 November 2023
Yale University & Map of Life Rapid Assessments - XPRIZE
8 November 2023
Yale University & Map of Life Rapid Assessments - XPRIZE
8 November 2023
The new white paper from Rainforest Connection (RFCx) explores the power of ecoacoustics and AI to monitor biodiversity and track progress towards GBF targets using case studies from around the world.
20 September 2023
Applications are now open for an open capital funding opportunity for projects demonstrating innovative approaches toward environmental monitoring at a sensor or systems-based level.
31 August 2023
Read our interview with Sandra Maryanne, a young conservation tech innovator raised in Taita, Ivarenyi with first-hand experience on the challenges of human-elephant conflict within her community. To address this, she...
7 August 2023
Join us as we count down the WILDLABS community's honorees in the first-ever #Tech4Wildlife Community Choice Awards!
3 August 2023
Exciting opportunity for an experienced biodiversity monitoring expert in ZSL's conservation department
18 July 2023
JICA, Japan’s International Cooperation Agency is seeking a digital partner with a proven track record in conservation technology as we launch a pilot project to test technologies to mitigate human-elephant conflict in...
19 June 2023
December 2023
event
November 2023
event
12 Products
Recently updated products
101 Products
1 R&D Projects
69 Organisations
Recently updated products
Recently updated R&D Projects
Recently updated organisations
Description | Activity | Replies | Groups | Updated |
---|---|---|---|---|
Hi Steph, We appreciate the support! Thanks for the tag and your help managing the community!Patrick |
|
Sensors, Acoustics, Conservation Dogs, Emerging Tech, Open Source Solutions | 1 month ago | |
Congratulations! My first hydromoth was just arrived yesterday and so excited! Looking forward for the update from your project!!! |
|
Acoustics, Biologging, Climate Change, Conservation Tech Training and Education, Data management and processing tools, Emerging Tech, Open Source Solutions, Protected Area Management Tools, Sensors, Software and Mobile Apps | 1 month ago | |
Hi everyone, @craig joined last month's Variety Hour to chat about Tagranger, which you can read more about here. A TagRanger®... |
|
Biologging, Connectivity, Sensors | 1 month 2 weeks ago | |
'Most importantly, we have to make it play a MIDI version of the DoctorWho theme song when you arm the device. That has to be the #1 feature if you ask me!' Seconded! |
+9
|
Acoustics, Biologging, Emerging Tech, Open Source Solutions, Sensors | 1 month 3 weeks ago | |
Sounds good. Just sent you a private message. |
|
Climate Change, Conservation Tech Training and Education, Sensors | 1 month 3 weeks ago | |
First things first, our team, @jcguerra10, @hefca, and myself, is thrilled to share with immense pride... |
|
Build Your Own Data Logger Community, Data management and processing tools, Sensors | 2 months 1 week ago | |
Hi @Henrikcox I hope you are well. I am not sure if you may remember myself and my colleague from CLS. We had a meeting and met in-person at Earthranger last year. ... |
+15
|
Human-Wildlife Conflict, Sensors | 2 months 1 week ago | |
Unless you are planning on making a mesh network between nodes then the total distance spanning the location of all the nodes is important to know, not just the intra node... |
|
Sensors, Protected Area Management Tools | 3 months 1 week ago | |
Hi Danilo. you seem very passionate about this initiative which is a good start.It is an interesting coincidence that I am starting another project for the coral reefs in the... |
|
Acoustics, AI for Conservation, Biologging, Camera Traps, Citizen Science, Climate Change, Community Base, Connectivity, Drones, Emerging Tech, Human-Wildlife Conflict, Open Source Solutions, Sensors, Software and Mobile Apps, Wildlife Crime | 4 months ago | |
Real nice video. I'll have another look in the weekend in detail. |
+10
|
Acoustics, Community Base, Protected Area Management Tools, Remote Sensing & GIS, Sensors | 4 months 1 week ago | |
Fire detection is a sort of broad idea. Usually people detect the products of fire, and most often this is smoke.Many home fire detectors in the US use a radioactive source... |
|
Community Base, Conservation Tech Training and Education, Data management and processing tools, Ethics of Conservation Tech, Human-Wildlife Conflict, Open Source Solutions, Protected Area Management Tools, Sensors, Wildlife Crime | 4 months 2 weeks ago | |
Thank you for sharing! Super interesting, as we don't see many underwater stereo cameras! We also use Blue Robotics components in our projects and have found them reliable and... |
|
Sensors, Camera Traps, Marine Conservation | 5 months 1 week ago |
3yr Postdoctoral Associate: Remote Sensing and Unoccupied Aircraft Systems
10 August 2022 5:29pm
Sulcata tortoise tracker options
8 August 2022 10:07pm
CERES TAG
22 July 2022 3:36am
The battery challenge - how to reduce battery waste
8 February 2019 2:00pm
15 July 2022 10:09pm
So-called "Li-Ion AA" batteries are a potential alternative to NiMH for applications requiring AA form-factor batteries. These "batteries" contain internal power converter to go from Li-Ion cell voltage (3.7V) to AA standard 1.5 Volt. Based on lab (not field) experiments, they perform better than NiMH over temperature, and have a longer lifetime, though they are more expensive. I suspect they have the same (eventual) disposal issues.
Deep Tech: Rechargeable Li-Ion AA Batteries for Trail Cameras - Winterberry Wildlife
I report on capacities of EBL, Pownergy, and Tenavolts rechargeable Li-Ion AA batteries under trail camera load and temperature conditions.
Winterberry WildlifeTrail Camera Batteries: Internal AA-Cell Options - Winterberry Wildlife
Trail cameras need power. In this post, I cover primary and rechargeable trail camera batteries including capacities and a selection guide.
Winterberry Wildlife15 July 2022 10:16pm
On the topic of potential sources for harvested power, and in the category of "out there"... I have spent some considerable (likely too much) time exploring harvesting power from diurnal temperature variation using thermal reservoir(s) and thermo-electric generator(s). The physics is not too bad, but the engineering is a bear. Project currently on hold, but if someone is interested, happy to discuss.
Earth Species Project - Senior AI Research Scientist
15 July 2022 6:40pm
Fast Company Feature: Smart Parks
14 July 2022 4:19pm
A Triphibian Surveillance Vehicle
9 July 2022 2:23pm
Conservation Technology and the Supply Chain
16 June 2022 2:27pm
Multiple Roles with Rainforest Connection
16 June 2022 9:15am
Join Seeed’s “IoT Into the Wild Contest for Sustainable Planet 2022” on Hackster to Get 100 Free Hardware and to Win $14,000+ in Prizes!!
14 June 2022 11:04am
Join Seeed’s “IoT Into the Wild Contest for Sustainable Planet 2022” on Hackster to Get 100 Free Hardware and to Win $14,000+ in Prizes!!!
14 June 2022 9:14am
Video: Delivering edge computing on Robinson Crusoe Island (Chile) to preserve biodiversity
13 June 2022 2:08pm
Nutrient sensors - affordable, user-friendly, effective - do they exist?
26 April 2022 12:49pm
6 May 2022 7:08pm
Hi Samantha,
This looks like a really interesting and beneficial project. Wishing you all the best with it.
Are you scouting for sensors that are archival and deployed / recovered over set period of time, or do you need telemetry / daily / hourly data to monitor change from tethered buoys etc? We are working on a similar solution with another partner, although not with microfuid-based sensors, but there are similar barriers regarding cost reduction and data collection.
Kind regards,
Alasdair
12 May 2022 3:43pm
It sounds like you're looking for multiparameter probes to deploy in the water to log in situ readings as part of the baseline you want to establish, and you might be deploying BRUVs, doing video transects, or taking soundscapes in addition, if I'm not too far off the mark.
The multiparameter probes will run you around USD10k each, kitted for let's say pH, conductivity, DO, turbidity, nitrate, and temperature. If you can rent these probes and the manpower to run them, that may be the best option if local expertise is lacking, as there are subtle gotchas. You might want to look into an automatic winched system which raises and lowers the probe, so you get readings throughout the whole water column. This may not be much more expensive than having 3 probes (at surface, bottom, and mid-depth). Other advantages include reduced biofouling (since the probe parks in air) and potentially reduced maintenance load due to this. But the disadvantages include fishers tying up to the system and boats colliding with it, and birds pooping on it, all of which have happened to me.
4 June 2022 7:55pm
What exact nutrients or parameters are you trying to measure?
Post-doc in Multi-Sensor Fusion for Animal Biomechanics
1 June 2022 9:56am
UKAN+ Monitoring UK Biodiversity Symposium 15-16th June
31 May 2022 2:58pm
UCL East Light Fabrication Workshop Manager
31 May 2022 11:12am
WILDLABS Virtual Meetups Season Four: Tracking Progress
29 April 2022 9:57am
Join the Black Mammalogists Week Hackathon!
19 April 2022 12:00am
Spotting primates w/ thermal scope
7 April 2021 1:33am
14 April 2021 2:02pm
Thanks, Carly. I did see this and didn't glean much from it, if I'm honest. Some more specifics on features, prices and tradeoffs when selecting a unit would've been welcome.
14 April 2021 8:42pm
Yeah, it did seem fairly general, but figured I'd throw it in.
I just actually came across this on Twitter - https://twitter.com/ElieDoesEcology/status/1380708784050331651?s=20. Perhaps worth shooting the authors of this paper an email on what tech they used/any advice?
4 April 2022 3:02pm
Iray PH35. like a DV . thermal camera. 640*328,35mm. could make videos. 2400 USD, china product, easy ship to Vietnam.
1km is the range to check monkeys, It is better to connect with your laptop or iPad when you are looking for wildlife, big screen for a good view.
Apply now: Women in Conservation Technology Programme, Kenya
8 March 2022 12:00am
Opportunity: Graphic Designer
8 March 2022 12:00am
Scale with data logger
7 January 2022 4:25pm
18 January 2022 1:23pm
Hi,
Can you clarify what you mean by "does not work"?
If I were to guess, I'd say the firmware temperature compensation tables for the load cell tops out at 40 deg C (104 deg F). Everything else should still function to 70 deg C, which is the most common and most lax rating for electronic components.
If this is the case, then the scale probably still retains precision (output is repeatable) even if it is inaccurate (output is wrong-ish), so it's possible to calibrate it. This could be as simple as tabulating the measured weights of standard weight samples at different temperatures, to adjust the output of your scale in post processing. Unfortunately this means you also need to log the temperature, and you'd want to store the scale at close to ambient temperature so it quickly equilibrates (a good idea regardless) when you need to use it.
The race to save California's rarest butterflies
29 November 2021 12:00am
Choosing the right IoT connectivity solution
19 November 2021 12:00am
ECG/heart rate & body temperature sensor
13 October 2021 4:43pm
15 October 2021 9:51am
Hi Guy,
Sparkfun carry an ECG module, but I don't know if this will work with sheep/goats. They've got lots of temperature sensors too, but I would look into something like MAX30205 if you need accuracy.
5 November 2021 6:28pm
Do you mean the sensor itself (that you're going make a tag out of) or a datalogger that records heart rate (sensor incoporated into a tag already)? Vectronic make some good terrestrial animal physiological sensors.
(trial) Habitat use within enclosure
5 November 2021 2:20pm
Proximity detection in koalas
12 August 2021 8:20am
24 October 2021 4:45pm
A great proximity system you've developed @LuciKirkpatrick ! Amazing! I am curious how you deal with having tags in receive mode long enough to ensure a contact is logged? What's the chances of a contact being missed because a transmission doesn't overlap with a receiver being on? It seems like not very often given the comparison with camera trap data!
Thanks so much for sharing and looking forward to reading more about the build.
Cheers,
Rob
4 November 2021 9:15am
Hi @Rob+Appleby , thanks for your kind words about our system! We ge around this by ensuring that the tag is in receive mode at least as long as the pause between two proximity transmissions. There is still the odd chance that some interference occurs or two or more transmissions collide, but generally it is pretty reliable.
4 November 2021 12:26pm
Hi @LuciKirkpatrick
Aha! A great strategy. I thought it might have been a 'wake on radio' solution, but the overlapping wait time is a really nice solution. Again, a great solution and looking forward to more build details etc., as they arrive.
All the best,
Rob
Opportunity: μMoth v1.1 Group buy
4 November 2021 12:00am
Tech Tutors: How do I turn a conservation tech project into a product?
27 October 2021 11:23am
Technical Difficulties: Expect the Unexpected
27 October 2021 12:00am
29 June 2022 8:47pm
Realizing I'm hopping onto this thread late, but I think one of the easiest ways to handle batteries is simply to work to minimize energy consumption--identify areas where we can improve deployment duration while generating comparable ecological knowledge. For example, in the case of the acoustic sensors I work with, can we reduce sample rates and still pick up our species of interest? Can we use a sparser duty cycle while still generating sufficient information to answer whatever our relevant questions are?