We have been facing some problems for Cameras either for monitoring nests or for quick deployment for medical or behavioral reasons. We need them to be low cost and easy to use.
The solution we have been working on is based on a board that we have been testing for a little while.
This is just a board so there is no case or protection. It's small light and is very flexible in it's possible uses. Connection to the camera is done via Wifi allowing down load of the video or still images. It records into two folders. The first is the constant feed and the clips are save in selectable bites. The second folder contains the movment detected clips. You can remove the memory card if you wish to collect all the footage at once but we have found that it has been very helpful to be able to collect a few of the more interesting clip wirelessly without having to get too close to the camera. The battery life on the internal battery is 4-8hrs but you can feed with 5volts either from mains or we have been using bigger batteries. It can have PIR added if required. With the right card it is claimed that you can see upto 30 days recording. It's not perfect for all applications but it has been very usfull for what we have needed it for. I have attached an image of the board and an installed camera.
Cost wise it should be sub $50
Here are the specs
Camera Image sensor, Mp2.0 mega-pixels CMOS
Camera Lens View angle120 degrees wide angle
Video Format MPEG-4
Photo Format JPG
Video Frame Rate30FPS
Loop recording Support( 1min /3min /5min )
Sound recording channels1 Channels
WifiBuilt-in (802.11b/g/n(2.4~2.4835GHz), Max: 150Mbps
Memory Card TF Card Up to 128GB
Recording date and time on the videoDate&Time
System Android 4.0 or above / iOS
Operating VoltageDC 5V
Do you have another solution? any thoughts or suggestions?