Does anyone know a camera type, that is able to be triggered again immediately after the last trigger? I am talking about maybe one or two seconds, also three would be good enough. The producers always propose, that the trigger speed is under one second and added with the recovery time (let´s assume also one second for that) this should guarantee a timegap under 2 seconds between two triggers. I need a constant triggering with as many pictures as close together as possible. Each camera, that I tested never gets under 4 seconds at its best, and commonly needs 7 to 10 seconds. I cannot afford the high end devices, so I tested the following cameras: Secacam Pro, Secacam ProPlus, Secacam Raptor, Browning Patriot, Browning Dark OPS Pro, Stealthcam STC, Moultry M40i, Moultry M50i and none of them is able to be retriggered faster than 4 seconds. I did try different settings with different numbers of burst-shots and I usually use the lowest resolution.
So I am really curious if there is a camera, that meets my reqirement? I guess, that REconyx cams can do this, but I am not so sure and they are too expansive anyway. Thank you for an answer,
13 January 2023 12:44pm
Browning spec ops and recon force models going back to the advantage series have a recovery time less than a second, and an ability to extend a video if the pir sensor is active. Current models are “recon force elite hp5” BTC-8E-HP5 (low glow flash) , and ”spec ops elite hp5” BTC-7E-HP5. Older models were advantage, edge, annd elite hp4.
Robert (Bob) Zak